RAM Factory Blind Spot Monitoring Programmer

RAM Factory Blind Spot Monitoring Programmer C‑BSM

Description

The RAM Factory Blind Spot Monitoring Programmer gives RAM, Dodge, Jeep and Chrysler owners the ability to activate factory blind‑spot monitoring and rear cross‑path detection on their vehicles. This programmer is a plug‑and‑play solution that programs your vehicle’s body control module through the OBD‑II port. Within a few minutes, your truck or SUV can gain the extra situational awareness that the factory blind‑spot system provides.

Key Features

• Activates factory blind‑spot monitoring and rear cross‑path detection at the OEM level.
• Simple, plug‑and‑play installation through the OBD‑II port; no tools or dealer visit required.
• Locking to your vehicle’s VIN—allows you to reactivate the feature after dealer software updates or battery disconnects.
• Built, engineered and supported in the U.S.A.

Vehicle Compatibility

This programmer is designed for a variety of Mopar vehicles (Ram, Dodge, Jeep and Chrysler). Compatible models include:

• 2015–2021 Chrysler 300
• 2017–2021 Chrysler Pacifica
• 2015–2021 Dodge Challenger
• 2015–2021 Dodge Charger
• 2014–2020 Dodge Durango
• 2014–2021 Jeep Grand Cherokee
• 2018–2021 Jeep Wrangler (JL)
• 2020–2021 Jeep Gladiator
• 2019–2024 Ram Truck 1500 & Heavy‑Duty 2500/3500/4500/5500

Installation Overview

1. Place your vehicle in the RUN/ignition or accessory mode (engine off).
2. Locate the OBD‑II diagnostic port beneath the steering column and plug in the OBD Genie programmer.
3. Wait roughly 1–5 seconds. The device’s green status light will illuminate and the horn may sound when programming is complete.
4. Remove the programmer and test the blind‑spot monitoring system in your side‑mirror indicators or instrument cluster.

Important Information

• Additional hardware may be required – the wiring harness and blind‑spot sensors are not included. You’ll need to install the sensors and wiring in the bumper or rear corners before programming.
• Security gateway bypass – vehicles model year 2018 and newer may require a Security Gateway Module bypass or SGW interface to allow programming through the OBD‑II port.
• The programmer locks to your vehicle’s VIN and can be reused to reenable the feature after software updates or battery disconnects.
• Please verify fitment with the compatibility list below and ensure your vehicle has provisions for blind‑spot hardware before ordering.

Vehicle Compatibility

This programmer is designed for a variety of Mopar vehicles (Ram, Dodge, Jeep and Chrysler). Compatible models include:

• 2019–2024 Ram Truck 1500 & Heavy‑Duty 2500/3500/4500/5500
• 2015–2021 Chrysler 300
• 2017–2021 Chrysler Pacifica
• 2015–2021 Dodge Charger
• 2014–2020 Dodge Durango
• 2014–2021 Jeep Grand Cherokee
• 2015–2021 Dodge Challenger
• 2018–2021 Jeep Wrangler (JL)
• 2020–2021 Jeep Gladiator