| User | Post |
|
5:52 pm
August 9, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
Post edited 7:59 pm – August 9, 2010 by Ozric762
Are these stock? Where would be a good place to get them? Eventually, when I do upgrade to larger tires, I would like the spare to be on the same wheel so as not to have offset problems.
Thanks
Carl
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
|
5:57 pm
August 9, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
I can't seem to upload a pic, but the wheels I have are the five spoke alloy with grey spokes.
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
|
9:35 pm
August 9, 2010
|
Electric Stooge
| | DDO West/Platteville | |
| Weekend Warrior | posts 804 |  
|
|
|
Post edited 9:39 pm – August 9, 2010 by Electric Stooge
one of these?
 
|
Mitch(1 of 3 stooges)
00' XJ, 5.5" Long arm, 32×11.5×15, 4.0l
If something electrical doesnt work right, throw a relay or 2 on it!
|
|
|
4:46 pm
August 10, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
Yes! Thanks! I have the type in the bottom pic. Do I have to go to a Jeep dealer? What are the chances that they are still made?
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
|
5:46 pm
August 10, 2010
|
Electric Stooge
| | DDO West/Platteville | |
| Weekend Warrior | posts 804 |
|
|
|
zilch at the dealer. They stoped using the bolt pattern entirely from what I can tell. Ur best bet is ebay, cregslist, or jeep forum
|
Mitch(1 of 3 stooges)
00' XJ, 5.5" Long arm, 32×11.5×15, 4.0l
If something electrical doesnt work right, throw a relay or 2 on it!
|
|
|
6:00 pm
August 10, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
That's what I was afraid of. Really though, as much as I would like spare to match, I really just need the same offset. Are there any recomendations?
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
|
6:02 pm
August 10, 2010
|
Tony M
| | Grand Rapids, MI | |
| Weekend Warrior | posts 510 | |
|
|
Junk yard. Tons of XJ's in the boneyard.
|
|
|
|
|
6:59 pm
August 10, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
Ok, so I see some wheels on CL that say they are 4 1/2" bolt pattern, but when I measure mine, I come up with 4 1/4". Am I doing something wrong or are mine just different?
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
|
10:03 pm
August 10, 2010
|
Electric Stooge
| | DDO West/Platteville | |
| Weekend Warrior | posts 804 |
|
|
|
U should be looking for 5/4.5 for the bolt pattern
|
Mitch(1 of 3 stooges)
00' XJ, 5.5" Long arm, 32×11.5×15, 4.0l
If something electrical doesnt work right, throw a relay or 2 on it!
|
|
|
7:58 pm
August 18, 2010
|
Ozric762
| | |
| Daily Driver | posts 186 | |
|
|
Ok, so I did find a guy on CL selling four rims, tires (plus small spare), an 8.25, and a Dana 30 for $250. He said he will split it up so if the rims aren't too bad Ill grab them. One for a full size spare that I can rotate and extras for replacements just in case.
|
'99 XJ with Flowmaster 50, Rusty's stabilizer, Rusty's 3" spring pack, GY Duratrac 31x10.5, JKS Quicker discos, Ares Fabrication front and rear bumpers, Spectre Performance cowl intake,
|
|
Login 
Register 
Search 
Home
Print this Post 
